PRODUCTION OF DOMESTIC POWDER


  • Department: Chemical Engineering
  • Project ID: CNG0324
  • Access Fee: ₦5,000
  • Pages: 70 Pages
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1,236
Get this Project Materials
ABSTRACT
This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing   powder).

During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown) were the materials used in the production of different powders. And equipment and apparatus used for production  of the three different powders  products are electronic weighing balance, mortar and pistle, beaker, filter paper, mixer and spatula.
 The simple face powder production. Talcum and perfume   or Zinc-oxide and perfume were used and was ratio or measured in other to standize the product. Also the Brown powder (pan-cake) Talcum, mineral oil  Zinc-sterate (Zinc-oxide) and colour were the material used in the production. Thus the Medicated/Antiseptic powder (dustin powder) comprises of Talcum, Irzasan 300 Dp, Menthol, and little addition of zinc-oxide.
All the three powder products has different stages of production and it involves the.

TABLE OF CONTENTS
Letter of Transmittal- - - -
Approval page- - - - -
Dedication   - - - -
Acknowledgement - - -
Abstract - -
 
Chapter one
Introduction

Chapter Two
Literature Review
Cosmetics
Cosmetic products
Lip stick
Cream
Powder
Classification of powder
Face powder
Simple powder
Brown powder 
General properties of powder
Slip
Talc
Properties of talc
Zinc oxide (ZNO)
Properties of Zinc oxide
Uses of Zinc oxide
Toilet powder Dustin powder
Function of Antiseptic-Dustin powder
Precaution on Antiseptic Dustin powder Application
Aftershave powder 
Baby powder 
Antiseptic powder 
Menthol
Effect on micro-organisms
Perfume
Preparation of starch
Properties of starch
Test for starch
Uses of starch
 
Chapter Three
3.0 Material and Experimental Methodology.
3.1  Material for production
3.2 Categories of powders produced .
3.3 Production procedure for simple powder
3.4 Apparatus and Experiment used
3.5 Aim of Experiment (Simple powder)
3.6 Method of production
3.61 Weighing stage
3.62 Mixing stage
3.63 Screening
3.7 Production of brown powder
3.71 Aim of Experiment
3.72 Weighing stage
3.73 Mixing stage
3.74 Screening stage
3.75 Compressing stage
3.8     Production  of Medicated/Antiseptic powder
3.81 Aim of Experiment
3.82 Weighing stage
3.83 Mixing stage
3.84 Screening stage
3.9      Test of products properties
3.91  Test for covering powder/opacifying ability
3.92 Test for Adhesiveness
3.93 Test for colour match
3.94 Test for pleasing odour
 
Chapter four
4.0 Experimental results
4.1Experiment I(Simple face powder)
4.2 Experiment II(Brown powder)
4.3 Experiment  III(Medicated /Antiseptic powder)
4.4 Physical test experimental result for physical properties/Qualities of produced powder.

Chapter  Five
Cost Analysis
Chapter  Six
Discussion

Chapter  Seven
Conclusion/Recommendation

Chapter  Eight
References
Appendix

  • Department: Chemical Engineering
  • Project ID: CNG0324
  • Access Fee: ₦5,000
  • Pages: 70 Pages
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1,236
Get this Project Materials
whatsappWhatsApp Us