ABSTRACT

The purpose of the study is to computerize quality control system in production (A case study of Anammco Nig. Ltd Enugu) and to develop a computer packages whereby the technique observed from the manual method can be improved on.

It is a known feet that the manual method of quality control in production has been associated with lots of inaccuracy in quality control and this has lead to early break down of parts when in service.

The software when developed will facility and enhanced the mode and methods of quality control in spare parts production of Anamco.

TABLE OF CONTENTS

Title page

Certification

Dedication

Acknowledgement 

Abstract

Organization of the work

Table of contents

CHAPTER ONE

1.0Introduction 

1.1Background information on Anammco

1.2Justification of the project

1.3Purpose of the study

1.4Scope of study

1.5Aims and objectives

CHAPTER TWO

2.1Literature review

CHAPTER THREE

3.1Description and analysis of the existing system

3.2Fact finding methods

3.3Organisation structure

3.4Objectives of the existing system

3.5Justification for the new system

CHAPTER FOUR

4.1Design of the new system

4.2Output specification and design

4.3Input specification and design

4.4File design

4.5Procedure chart

4.6System flowchart

4.7System requirement

CHAPTER FIVE

5.1Implementation

5.2Program design

5.3Program flowchart

5.4Pseudocodes

5.5Test run

CHAPTER SIX

6.1Documentation 

CHAPTER SEVEN

7.1Recommendation 

References