SAFETY MANAGEMENT PROGRAMME IN MANUFACTURING FIRM USING
THE NINTH MILE ENUGU AND GOLDEN GUNIEA PLC (NBPC) UMUAHIA FOR THE EASE STUDY.
ABSTRAT
The research is an earnest effort to evaluate the safety programmes used by firms to find out the impact of enhanced safety management programme in Nigeria industries.  To achieve a good result, the researchers made a critical evaluation of type of safety management programmes in manufacturing  firm, using the EE Ninth Mile Enugu and Golden Guinea plc. (NBPCL) Umuahia for the case study.
A sample population of 89 was used to study a target population of 212 made up of 26 top management and 63 factory workers of the two government industries.
Questionnaire and personal interview were used to collect data for analysis.
The result of the protective equipment (PPE) were used, the entire industrial workers lacked safety consciousness which contributed to high rate of industrial accidents.
       TABLE OF CONTENTS
CHAPTER ONE
1.0              Introduction
1.1       General background of the subject matter
1.2              Problems associated with the subject matter
1.3              Problem(s) that research will be concerned with
1.4              The important of studying the area
1.5              Definition of important terms
1.6              (Chapter) reference using APA method
CHAPTER TWO
1.0              Literature review
2.1       The origin of the subject area
2.2              School of thought with the subject area
2.3              The school of thought relevance to the problem of the search.
2.4              Different method of studying the problem
2.5              Summary
2.6              Reference
 CHAPTER THREE
2.0              Conclusive conclusion
3.1       Data presentation and highlighted of the study
3.2              Analysis of the data
3.3              Recommendation
3.4              Conclusion
3.5              Reference
CHAPTER ONE
1.1       BACKGROUND OF THE SUBJECT MATTER
There is no double that industry is one of the most important sectors of the economy.  The fact that a major share of the nations yearly budget goes to the industrial sector remains a testimony.  In Nigeria industrialization, virtually unknown twenty years ago is providing the much needed new dimension into which the national economy can expand and diversity.
With dynamism in industrial activities, new and modern sophisticated technology is involved, when these equipment are not used by trained workers, accidents could result because of wrong handling causing damage to equipment and the advice that why brain (1990) gain the advice that safety awareness should be created in the minds of management of all manufacturing organization no matter their size or level of growth.  It goes without saying that accidents occur in an industry and if not minimized or checked would ultimately affected productive capacity of the workers as well as the management of the industry and economy in general.
Having known that accidents prevent organization from accomplishing objectives and goals, the question now should be, what measures are the 50- called management of industry doing to ameliorate, if not totally eradicate the rate of injury and accidents occurrence in the government owned industry.  The managers are expected to be at the upper echelon, introducing measures and mounting pressure to ensure safety and protection against.  Their hazards and accident in the work environment. Unfortunately some management look at safety  programme as added cost to the organization hence, they have tended to relent to forestalling the possible hazard in the firm.
In addition to this, Shublin in Udeze (2000:243) indicated that management should realize that reduction of accident covers their high direct and indirect accident costs of more than pay for the expense of a continuing safety programme.
There has been a lot of hues and cries calling for the attention of the management towards work safety, there has equally been a factory act of 1958 which stipulates certain safety standards in manufacturing companies; there has also been the government insistence that safety should be given priority attention as a part of the social responsibility of the organization it is in the light of all these that this study has embarked on finding out the impact of safety management on workers  performance in government owned industries.
But the problem has often been that management that employees does not feel responsible for ensuring that such hazards are removed.
The safety management programme that should trail industrialization is lacking.
 1.2      PROBLEMS ASSOCIATED WITH THE SUBJECT MATTER
Accident and hazards are the inevitable phenomenon of any human organization but the concern of every rational and curious researcher is on the measures that should be applied to minimize the occurrence of accident in government owned industry.
Furthermore, it is difficult to described a situation in which in spite of various academics writes ups government concerned about workers safety. This is why Anibata (1991:38) in his analysis opi9ned that as industrial workers depends on his employer, as being able to providing him with his safety requirements needed for his work and to receive some compensation when his health is affected, these requirement when absent creates laxity in workers.
Workers in the government owned industry are often injured, maimed and incapacitated as a result of industrial resident  and to add that some management are not even aware of their role and responsibility as regards to industrial accident.  Though some argue that however careful we are, accident can still happen but, what of a situation where workers are not given adequate training or where management are not concerned about safety.
For the employees to be committed and work toward achieving organizational goal and objective their own individual need and aspiration must also be met. Thus, it is the responsibility of the management to ensure that all employees are properly equipped and trained so that employee would work safety and productively.
Good safety behaviour should be a condition of employment and should be treated in the same way as any other performance criterion.  Poor safety performance in any section of the business demands correction which good performance needs recognition.  There fore, management to achieve its set goals must foster and nurture a committed work force, which can be achieved by setting their aspiration fulfilled.  Attention channeled towards improving the environment upon where workers work and their safety considerations, help in goal attainment for example, a Nigerian worker who feels that his life is as stake when operating a machine without adequate protective equipment might not put his best no matter the monetary rewards because life  has no duplicate.
1.3       PROBLEM(S) THAT WILL BE CONCERN WITH
The following research question were used to draft the questionnaire to the study .
i.          How does your company ensure effective implementation of her safety management programme?
ii.         What are the positive effects on workers performance that result from the implementation of your company’s safety management prgramme?
iii.        How secure is your place of work against factory accidents?
iv.        What are the negative effects that your company’s safety management programmes have on workers performance?
1.4       THE IMPORTANCE OF STUDING THE AREA.
This study on the impact of safety  management programme in Nigeria industries would benefit the workers, companies and Nigeria in general if implemented for instance.
i.                    Would emphasize the role  of the working supervisors and the importance of his responsibilities for the safe operation of plants  control of people in a hazardous working environment.
ii.                  Would emphasize the type of training needed and given to the worker about safety at work place and developing safety consciousness.
iii.                Would motivate staff to work safety for the benefit of themselves, other and to the nation.
iv.                It will bring about a major improvement in safety performance in a way that will be sustained.
1.5       DEFINITION OF IMPORTANT TERMS.
The following terms have been used in a number of places in the study for the purpose of this research they have been used in the following sense .
SAFETY-       Freedom from accident in the work place.
ACCIDENT- Any unpredicted unplanned event, which could result in personal in jury, damage to plant, in creased cast, loss of production and population of the environment.
HAZARD-     A hazard is any condition that might operate against the safety workers.
IMPACT-      The  impression the programme made on the workers.
PERFORMANCE-   What is accomplished contrasted with capacity.
PPE-   Personal protection equipment