This project work, is a computerization it Performance evaluation of routing algorithm using  NS2 of an organization.  Full duplex asynchronous data transfer system based on a single-phase two-line coding. (a) Data is transmitted from a primary module PM to a secondary module SM, while data is transmitted from the secondary module SM to the primary module PM independently at the same time. (b) Code words A and B, in which data and color (request signal: ODD or EVEN) are superimposed on each other, are sent from the primary module PM and secondary module SM during a request mode. When the two colors are coincident with each other, the data are sent. A code word C is created, on transmission pincode numbers, from the code words A and B and sent to the primary module PM and secondary module SM during a response mode. The two modules are adapted to determine from the code word C that the colors are the same. When the colors are the same, the respective transmitted data are decoded from the code word C. In this way, a data transfer can be performed in a full duplex asynchronism during a single cycle

TITLE PAGE

DEDICATION 

ACKNOWLEDGEMENT 

ABSTRACT

TABLE OF CONTENT

CHAPTER ONE 

INTRODUCTION 

STATEMENT OF THE PROBLEM 

PURPOSE OF THE STUDY

AIM AND OBJECTIVES 

SCOPE DELIMITATION

CHAPTER TWO

LITERATURE REVIEW

CHAPTER THREE

DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM 

FACT FINDING METHOD USED 

OBJECTIVE OF THE EXISTING SYSTEM 

PROBLEM OF THE EXISTING SYSTEM 

JUSTIFICATION OF THE NEW EXISTING SYSTEM

CHAPTER FOUR 

DESIGN OF THE NEW SYSTEM 

OUTPUT SPECIFICATION AND DESIGN

INPUT SPECIFICATION  AND DESIGN

FILE DESIGN

PROCEDURE CHART

EXPECTED BENEFITS OF THE NEW SYSTEM 

IMPLEMENTATION 

CHAPTER SIX

DOCUMENTATION

CONSTRAINT (LIMITATION)

CHAPTER FIVE

RECOMMENDATION AND CONCLUSION

REFERENCE

APPENDIX

PROGRAM CODING