ABSTRACT
After detailed study on machines and levers, the construction work started as follows:-
Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages.
The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given below:-
Upper surface of bowl - 850mm
Inner surface of bowl - 335mm
Stand height - 325mm
Diameter of wheel - 250mm
Diameter of shaft seating and the shaft 4mm
Thickness of type - 75mm
The drawing of the project was done and enclosed at the end page of this booklet. At last, a 150kg capacity of conveying machine was constructed.
TABLE OF CONTENTS
Title pages
Title page
Approval page
Dedication page
Acknowledgment page
Abstract
CHAPTER ONE
Introduction
Historical background
1.2 Need for constructing the machine
CHAPTER TWO
THEORY/LITERATURE SURVEY
2.1 Types of load to be carried by the conveyor
2.2 Operation of the wheel-barrow
CHAPTER THREE
3.1 Equipments/tools employed during construction of the wheel-barrow
3.2 Materials of construction
3.3 Construction procedure
3.4 Sequence of operation
3.5 Design calculations
3.6 Calculations basic on the bowl
3.7 Specifications
3.8 Project drawing
CHAPTER FOUR
COSTING OF PORTABLE WHEEL-BARROW
4.1 Material cost analysis
4.2 Labour cost analysis
4.3 Miscellaneous costs
Total cost
CHAPTER FIVE
5.1 Discussion
5.2 Precautions taken during construction
5.3 Cautions to users
5.4 Recommendations
5.5 Conclusions
References
