ABSTRCT
This project aimed purposely at the production of topographic plan of Government technical college idah Kogi State. The following surveying methods are carried out to achieve this project. A reconnaissance surveying of the area to be survey was carried out before other topographical surveying method was carried out total station traversing for coordinating of the station was carried out leveling which is purposely aimed at determining the deference in spot height after which the topographical map was produced at the scale of 1:5,000, this plan would be immense value as would be suit for the designing and planning of the infrastructural developing of the study area such as roads, building a clear image of the surface of the ground, topographical. Conventionally should land configuration by means of contour lines.
TABLE OF CONTENT
Title Page
Certification
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE: INTRODUCTION
1.1 Aim Of The Study
1.2 Objective Of The Studies
1.3 Significant Of The Project
1.4 Limitation Of The Study
1.5 Scope Of The Study
1.6 Study Area
1.7 Date And Duration Of The Project
1.8 Project Order And Specification
1.9 Level Pf Participation
CHAPTER TWO: PROJECT PLANNING
2.1 Data Search
2.2 Instrument Test
2.3 Instrumentation
2.4 Temporary Adjustment
2.6 Field Reconnaissance
2.7 Verification of Controls (In Situ Check)
2.8 Computation of Data from Coordinate Values
2.9 Selection of Station
2.10 Documentation
2.11 Data Sources
2.12 Secondary Data Source
2.13 Primary Data Source
CHAPTER THREE: DATA ACQUISITION
3.1 Spatial Data Acquisition
3.2 Total Station Traversing By Direct Coordination Technique.
3.3 Spot Heightening: The Procedures Were:
3.4 Detailing
CHAPTER FOUR: DATA PROCESSING
4.1 Forward Computation
4.2 Back Computation
4.3 Area Computation
4.4 Abstraction of Data
4.5 Analysis of Result
4.6.1 Analysis of Linear Errors
4.6.2 Analysis of Elevation Closure
4.6.3 Analysis of Linear Accuracy
4.7 Map Production
CHAPTER FIVE: PROBLEMS ENCOUNTERED, PRECAULTION TAKEN RECOMMENDATION AND CONCLUSION
5.1 Problem Encountered
5.2 Precaution Taken
5.3 Recommendation
5.4 Conclusion
References
Appendices